Stainless Steel Sheet Finishes
No. 1 A rough, dull surface that results from hot rolling to the specified thickness followed by annealing and descaling.
No. 2D
A dull finish produced by cold rolling to gauge, then annealing and pickling in acid to remove scale and oxide
from an open air anneal.
No. 2B
A reflective cold rolled finish produced in the same manner as 2D Sheet Finish, except that a light temper
passes on polished rolls is performed on the annealed and pickled product. This is the general-purpose cold rolled finish that can be used as is, or as a preliminary step to polishing.
Bright Annealed(BA)
A highly reflective cold-rolled finish produced by cold rolling to gauge, then bright annealing in a protective
inert atmosphere. This process results in no scaling of the product, leaving a bright reflective finish. A light
temper passes on polished rolls is performed on the bright annealed product. This finish is also available
without the final temper pass, in which case the finish is not quite as bright.
Post a Comment
0Comments